We would like to show easYgens generator power factor cosphi via analog output on an external instrument . 
For this we use easYgen's analog output 6  (0-20mA). 
The analog display has an input of 0-10V. 
0-10V voltage we are getting by adding a 500Ω resistor. (I=U/R)

PF 0,5 kap.  ≙ 0mA         ≙ 0V
PF 1            ≙ 10mA       ≙ 5V
PF 0,5 ind.   ≙20mA       ≙ 10V

Please add  01.20 Gen PF % in the AnalogManager of ToolKit and set the min and max values accordingly. 

 In your example it would look like this... 
(50% =5V= corresponds to PF=1)

See as well this article:

https://support.easygen.org/en/kb/articles/i-want-to-provide-a-0-4-20ma-powerfactor-setpoint-signal-to-easygen-3000xt