メインコンテンツへスキップ

Software Tools - ナレッジベース / other - Power Generation

Software Tools

作成者一覧

Software Tools

Toolkit software

This is the standard configuration software for most Woodward control products. 

9927-1226   Toolkit 7.x Basic

8447-5002 SOFTWARE LICENSE-TOOLKIT ADVANCED LICENSE - order option

8928-5016 SOFTWARE LICENSE-TOOLKIT DEVELOPER LICENSE - order option

Toolkit SC

Toolkit SC

configuration of easYgen-x00 and easYgen-1x00 Series, easYlite-200 and the 16x Digital Input / Output Expansion Modules  

LDSS emulation

10-012-060    SOFTWARE-LDSS EMULATION TOOL

Improve fuel efficiency and reliability!
Work through what-if scenarious for your genset fleet.
    • Monitor that all or several of the power generating assets does not approach maintenance cycle simultaneously
    • Maintain sufficient reserve power on the bus in anticipation of a large consumer and that the reserve power automatically falls back after the large consumer breaker is closed
    • Start and stop the gensets according to max/min loading criteria, the later especially to help burn car-bon deposits on engines cylinder head
    • Switch ON and OFF the genset at every pre-defined run hours to equalize the total run hours
    • Determine the optimum combination of gensets when the fleet consists of mixed size gensets
Modbus Master Mapper

P/N 10-017-822   Modbus Master Mapper
Modbus / TCP customization to read and / or write data.

  • flashing of the generated customized Modbus / TCP via Toolkit into the controllers easYgen3000XT and LS-6
  • mappable address points for read/write tasks to exchange information with Power Electronics (eg. PV Inverters), protection relays, kW Transducers

Licensing Process see here. 

Data Telegram Mapper

Data Telegram Mapper

Simplify your retrofit projects! Customize your Modbus TCP protocol.
    • configure the Modbus data protocols
    • up to 300 addresses
    • upload file into the easYgen3000XT or LS-6XT (*.map file)
    • documentation of the created telegram ( HTML file)
HMI localization tool

HMI Localization

The easYgen3000XT Series allows to enter a custom language via a dedicated MS Excel based PC tool.

Interconnect Mapper

Interconnect Mapper - unlock the full potential of your easYgen with Ethernet communication capabilities

  • Seamlessly send and receive data between easYgen devices using the Ethernet communication bus

  • Download the InterconnectMapper tool from Woodward to configure data transfer and create setup files to enable communication via UDP messages

  • Easily define which device sends which data at what rate for efficient communication

  • Receive up to 99 analog values and 99 Boolean values for maximum data transfer capability

  • Send all AnalogManager and LogicsManager values, as well as defined indices and constants

  • Create mapping files to upload to devices for easy data exchange between multiple devices

  • Directly upload map files via Woodward Toolkit or ftp access

  • Examples of data transfers show the versatility and flexibility of the InterconnectMapper tool

*Note that the tool requires a license, but even unlicensed, it is fully functional for data transfer.

 

P/N 10-031-250 SOFTWARE LICENSE-INTERCONNECTMAPPER LICENSE

easYview

easYview visualization

atvise builder

atvise connect

IKD config

IKD config

The latest part number 8440-2116 is a pre-configured device. So for applications with only one IKD, it’s a plug & play solution.
 
If you use more than one IKD on CAN bus, please use the USB configuration cable – part number 5417-1251 and download the IKD configuration software.
Simulation_software 10-059-783   POWER SYSTEM SOFTWARE SIMULATION - 3 MONTHS ACCESS (NO SUBSCRIPTION)  order option
 
So far it was required to build up the complex wiring for a hardware emulation and one couldn’t test many functions properly.
 
Your advantages:
    • commissioning becomes significantly easier & thus faster, as the corner cases have been tested in the simulation already.
    • trouble shooting becomes significantly easier
    • end-customers have agreed in other projects to replace the factory acceptance test with the simulation
    • the simulation might help to on-board new staff members on these complex products in a cost-effective way

Functions:

    • applying loads based on your own requirements
    • there is a simulation of gas / diesel gensets with standard genset models (being close to reality)
    • the simulation is really very similar to building up real gensets for a factory acceptance test
    • it’s possible to simulate the total operational behavior
    • there will be only minor modifications required in between the simulation model and the reality (eg. for the specific diesel / gas gensets)
Power Systems learning module

8447-1012    SOFTWARE KIT-SOFTWARE KIT  POWER SYSTEM LEARNING MODULE

  • Interactive learning using realistic active simulation engine / generator models
  • Engine speed control fundamentals
  • Speed control dynamic tuning
  • Automatic voltage regulation fundamentals
  • Electrical power generations fundamentals
  • Power factor and VAR fundamentals
  • Synchronizing
  • Various load control schemes
  • Exercises for each topic