メインコンテンツへスキップ

Load old DSLC-2 WSET File into DSLC-2XT - ナレッジベース / DSLC-2 - Power Generation

Load old DSLC-2 WSET File into DSLC-2XT

作成者一覧

Load an old  DSLC-2 .wset file

 • Open ToolKit version 6.4 or higher 

• Go to TAB [Settings] and Click [Associate w/ Application] → Window appears 

• Select the ... .wset file to be updated and Click »Next >« 

• Select the  DSLC-2XT- .sid file and Click »Next >« 

• Define name and location/folder of new .wset file where settings will be saved to and Click »Next >« → Now it will take some seconds 

• If settings conversion is installed between the original software version and the target version defined by the target *.sid file (which comes with installing the tool for this particular easYgen version), an automated settings conversion will be started ◦ Settings differences will be detected and resolved ◦ If resolving was not possible, a list with information and possible warnings is displayed This information is also available in \\ProgramData\Woodward\ToolKit \SettingsConversion\conversionlog.txt on the PC