 |
This is the standard configuration software for most Woodward control products.
9927-1226 Toolkit 7.x Basic
8447-5002 SOFTWARE LICENSE-TOOLKIT ADVANCED LICENSE - order option
8928-5016 SOFTWARE LICENSE-TOOLKIT DEVELOPER LICENSE - order option
|
 |
Toolkit SC
configuration of easYgen-x00 and easYgen-1x00 Series, easYlite-200 and the 16x Digital Input / Output Expansion Modules
|
 |
10-012-060 SOFTWARE-LDSS EMULATION TOOL
Improve fuel efficiency and reliability!
Work through what-if scenarious for your genset fleet.
-
-
Monitor that all or several of the power generating assets does not approach maintenance cycle simultaneously
-
Maintain sufficient reserve power on the bus in anticipation of a large consumer and that the reserve power automatically falls back after the large consumer breaker is closed
-
Start and stop the gensets according to max/min loading criteria, the later especially to help burn car-bon deposits on engines cylinder head
-
Switch ON and OFF the genset at every pre-defined run hours to equalize the total run hours
-
Determine the optimum combination of gensets when the fleet consists of mixed size gensets
|
 |
P/N 10-017-822 Modbus Master Mapper
Modbus / TCP customization to read and / or write data.
-
flashing of the generated customized Modbus / TCP via Toolkit into the controllers easYgen3000XT and LS-6
-
mappable address points for read/write tasks to exchange information with Power Electronics (eg. PV Inverters), protection relays, kW Transducers
Licensing Process see here.
|
 |
Data Telegram Mapper
Simplify your retrofit projects! Customize your Modbus TCP protocol.
-
-
configure the Modbus data protocols
-
up to 300 addresses
-
upload file into the easYgen3000XT or LS-6XT (*.map file)
-
documentation of the created telegram ( HTML file)
|
 |
HMI Localization
The easYgen3000XT Series allows to enter a custom language via a dedicated MS Excel based PC tool.
|
 |
Interconnect Mapper - unlock the full potential of your easYgen with Ethernet communication capabilities
-
Seamlessly send and receive data between easYgen devices using the Ethernet communication bus
-
Download the InterconnectMapper tool from Woodward to configure data transfer and create setup files to enable communication via UDP messages
-
Easily define which device sends which data at what rate for efficient communication
-
Receive up to 99 analog values and 99 Boolean values for maximum data transfer capability
-
Send all AnalogManager and LogicsManager values, as well as defined indices and constants
-
Create mapping files to upload to devices for easy data exchange between multiple devices
-
Directly upload map files via Woodward Toolkit or ftp access
-
Examples of data transfers show the versatility and flexibility of the InterconnectMapper tool
*Note that the tool requires a license, but even unlicensed, it is fully functional for data transfer.
P/N 10-031-250 SOFTWARE LICENSE-INTERCONNECTMAPPER LICENSE
|
 |
easYview visualization
atvise builder
atvise connect
|
 |
IKD config
The latest part number 8440-2116 is a pre-configured device. So for applications with only one IKD, it’s a plug & play solution.
If you use more than one IKD on CAN bus, please use the USB configuration cable – part number 5417-1251 and download the IKD configuration software.
|
 |
10-059-783 POWER SYSTEM SOFTWARE SIMULATION - 3 MONTHS ACCESS (NO SUBSCRIPTION) order option
So far it was required to build up the complex wiring for a hardware emulation and one couldn’t test many functions properly.
-
-
commissioning becomes significantly easier & thus faster, as the corner cases have been tested in the simulation already.
-
trouble shooting becomes significantly easier
-
end-customers have agreed in other projects to replace the factory acceptance test with the simulation
-
the simulation might help to on-board new staff members on these complex products in a cost-effective way
Functions:
-
-
applying loads based on your own requirements
-
there is a simulation of gas / diesel gensets with standard genset models (being close to reality)
-
the simulation is really very similar to building up real gensets for a factory acceptance test
-
it’s possible to simulate the total operational behavior
-
there will be only minor modifications required in between the simulation model and the reality (eg. for the specific diesel / gas gensets)
|
![]()  |
8447-1012 SOFTWARE KIT-SOFTWARE KIT POWER SYSTEM LEARNING MODULE
-
Interactive learning using realistic active simulation engine / generator models
-
Engine speed control fundamentals
-
Speed control dynamic tuning
-
Automatic voltage regulation fundamentals
-
Electrical power generations fundamentals
-
Power factor and VAR fundamentals
-
Synchronizing
-
Various load control schemes
-
Exercises for each topic
|
