There are two ways to get an easYgen with support for MDEC Protocols V302, V303, V304.

1. order the easYgen with the MDEC option: P/N 8440-2318 easYgen-3500XT-P2-K58

2. flash  easYgen-3500XT-P2 (8440-2087 and  8440-2088) controls to enable MTU MDEC communication via a Software Licensing feature -  P/N 10-030-826 LEGACY CAN AND MDEC SUPPORT PACKAGE

   
   

Old legacy GCP-3x-Option Sc02 and SC10 controls supported the MTU MDEC CAN communication, as well:

Following ECU data are visualized :

The easYgen 3500XT-P2 receives following analog data from the MDEC via CAN2 :

• 11.67 MDEC Coolant temperature [°C]

• 11.68 MDEC Oil pressure [bar]

• 11.69 MDEC Oil temperature [°C]

• 11.70 MDEC Fuel temperature [°C]

• 11.71 MDEC Engine speed [rpm]

• 11.72 MDEC Operation hours [h]

• 11.73 MDEC Error code

• 11.74 MDEC Feedback speed [rpm]

The easYgen 3500XT-P2 receives the following binary data from the MDEC via CAN2 :

• 05.24 MDEC Yellow alarm

• 05.25 MDEC Red alarm

• 05.26 MDEC Alive timeout (True if MDEC Alive message is missing for more than • 1000 ms.)

• easYgen-3500XT-P2 is supporting speed bias connected to MDEC based on

CANbus,

• 0-5V ,

• 0-10V,

• 4-20mA,

• raise & lower pot free contacts

This Software Package includes as well the legacy CAN bus of old GCP-3x controls,

enabling easYgen-3500XT-P2 to talk to obsolete Gateways like GW4-PRO or GW4- Modbus

connected to upper PLC Controllers.

Legacy CAN is not supporting LS-4 communication and Loassharing (Loadshare Gateway LSG required) !