The DTSC-200A gets connected via a market standard USB-Mini connection.
(please make sure it’s not just a power cord and includes the data connection wires)

A general product introduction is available here: https://easygen.eu/ats/

The latest Toolkit software for the DTSC-200A is available here:
https://wss.woodward.com/manuals/PGC/SW_Tools/ToolKit

Please download the device configuration files here:
https://easygen.org/configuration_files/

The following video playlist contains two introduction videos for Toolkit. While most of the Videos were made for a different control, the two Toolkit videos are also valid for the DTSC-200A:
https://youtu.be/zsV8SWC-p7A?list=PLW55kmXY0fHCoZptLxzCvzmB5POGRbfYK

Please have a look into the following document - starting with page 10 on Toolkit:
https://wss.woodward.com/manuals/PGC/DTSC_series/DTSC-200A/01_Technical_Manual/37940_TM_DTSC-200A_Configuration_B.pdf

Typical issues:

In some cases the USB Driver installation, doesn’t get automatically installed. In such cases, please try to install the second driver used for DTSC-200A.

https://wss.woodward.com/manuals/PGC/SW_Tools/USB_Drivers

We hope this article helped you to get started with your Woodward DTSC-200A controller!